Tankless Water Heater Repair Johns Creek

Tankless Water Heater Repair Johns Creek GA Troubleshooting

Usually, quite a few of the troubles that might occur with a tankless water heater, causing it to need a repair are external elements. Right here are a few of them:

Improper venting. The most typical mistake with a tankless installation is using normal B-vent, which can quickly ruin the heat exchanger due to acidic condensation.
Improper sized gas supply line. Occasionally the supply line is undersized and was just connected to the existing line size. The size specified in the installation handbook has to be used.
The gas pressure is not appropriate. The working pressure should be from 5 to 10 1/2 inches WC for Natural Gas and 9 1/2 to 14 inches for Liquid Propane, relying on the model.
The wrong type of gas that is being made use of – natural gas or liquid propane. It is not possible to utilize the non-specified type.
Water flow or temperature level change concerns. There are a number of things we will check to ensure they are working appropriately, like cleaning or replacing the input filter, examining the check valve, inspecting the seals in the faucets and exploring to determine if there exists a cross flow somewhere that needs to be fixed.
Hard Water Problems: In locations where the water is very hard, de-scaling will be required regularly.
Environmental issues. The heaters must be set up in a clean location with access to combustion air that is devoid of dust, lint, grease, or chemicals.

Do not hesitate to let us know of any complications you are experiencing with your tankless hot water heater, or if you simply want some info on deciding if having one might be a good fit for your property.

Tankless Water Heater Repair Johns Creek

Tankless Water Heater Repair Services Johns Creek

Back to Water Heater Repair Johns Creek